Belgian Sexual Assault Care Centres: Monitoring and Evaluation

Belgian Sexual Assault Care Centres: Monitoring and Evaluation

Welcome to the technical documentation pages for the project "Belgian Sexual Assault Care Centres: Monitoring and Evaluation (BSACC-ME)", provided by the service healthdata.be (Sciensano).

These pages provide information about the technical processes of the project. The following sections are (will be) provided:

For scientific information of the project, please contact the primary organization that oversees implementation of project (see section "General project information").

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!

manager Wed, 05/10/2023 - 11:33

General BSACC-ME project information

General BSACC-ME project information

Project name

Belgian Sexual Assault Care Centres: Monitoring and Evaluation

Project abbreviation

BSACC-ME

Project code

HDBP0242

Primary organization that oversees implementation of project

  • Institute for the equality of women and men

Partner organization participating in project

  • National Institute of Criminology and Criminalistics

Organization that commissioned this project

  • Not available

Organization providing monetary or material support

  • Institute for the equality of women and men

Brief project description

Belgian Sexual Assault Care Centers (SACCs) have been established at the end of 2017 in three Belgian hospitals (UMC Brussels, UZ Gent, CHU Liège). SACCs offer holistic care to victims of sexual violence, including medical and psychological care, a forensic examination and the possibility to report to the police at the SACC.

The main objectives of the BSACC-M&E project are :

  • to facilitate the epidemiological follow-up of sexual violence by monitoring the profile of victims of sexual violence and the characteristics of the sexual violence
  • to ensure good quality of care to victims by monitoring the effects of sexual violence on the physical, sexual and reproductive and mental health of the victims, and the care/treatment provided at the SACC and in other hospital services linked to the SACC.

Regulatory framework of this project

Consult the regulatory framework information published on the fair.healthdata.be pages.

manager Tue, 04/04/2023 - 11:00

The BSACC-ME data collection

The BSACC-ME data collection

Organizations and/or individuals that provide data

  • Centre Hospitalier Universitaire de Liège (CHU Liège)
  • Universitair Ziekenhuis Leuven (UZ Leuven)
  • Centre Hospitalier Universitaire Charleroi - Hôpital Civil Marie Curie (CHU Charleroi)
  • Universitair Ziekenhuis Antwerpen (UZA)
  • Algemeen Ziekenhuis Delta (AZ Delta)
  • Centre Hospitalier Universitaire Saint Pierre Bruxelles (CHU Saint Pierre Bruxelles)
  • Universitair Ziekenhuis Gent (UZ Gent)
  • Ziekenhuis Oost-Limburg A.V. (Genk)
  • CHRSM-Site Meuze (Namur)
  • Vivalia Cliniques Sud Luxembourg (Arlon)

Start date of the data collection

To be determined, pending deliberation of ISC-SSH

End date of the data collection

Not applicable

Periodicity of the data collection

Continuous

manager Tue, 02/27/2024 - 14:19

The BSACC-ME Data Collection Definition (HDBP0242)

The BSACC-ME Data Collection Definition (HDBP0242)

In the file below you can find the Data Collection Definition (DCD) specifications of the project BSACC-ME. It is a detailed description of the content of the 6 DCD's:

  • First registration
  • Follow-up - Involvement police and prosecutor
  • Follow-up - Casemanagement contact
  • Follow-up - Casemanagement redirection
  • Follow-up - Medical follow-up
  • Follow-up - Psychological follow-up

with field names, formats, values, validation rules, help texts, error messages, translations... These specifications were used to build the forms, csv's, and API's for this project, which you also can find in this project manual.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Tue, 02/13/2024 - 09:30

The BSACC-ME Dataflow description

The BSACC-ME Dataflow description

Below we describe (high level) the BSACC-ME dataflow between the data provider and the healthdata.be platform.

Step 1. Automatic data export from systems of data provider towards HD4DP v2 and prefill of forms if not complete.

Step 2. Manual registration (de novo or completion) of data in form component of HD4DP v2.

Step 3. Direct real time transfer of registry variables and technical ID of record from HD4DP v2 towards HD.

Step 4. Transfer of patient identifiers and technical ID of record from HD4DP v2 towards eHBox messaging client of HCO (HCO UM/EM).

Step 5. Transfer of patient identifiers and technical ID of record from eHBox messaging client of HCO (HCO UM/EM) towards TTP service of eHealth.

Step 6. Transfer of pseudonymized patient identifiers and technical ID of record from TTP service of eHealth towards eHBox messaging client of HD (HD UM/EM).

Step 7. Transfer of pseudonymized patient identifiers and technical ID of record from eHBox messaging client of HD (HD UM/EM) to HD Integration engine.

Step 8. Joining of pseudonymized patient IDs and the registry variables based on the technical ID and Transfer of the records from HD Integration engine towards Data Validation environment on DHW.

manager Tue, 04/25/2023 - 12:46

HD4DP v2

HD4DP v2

For the project "Belgian Sexual Assault Care Centres: Monitoring and Evaluation" only the local version of HD4DP v2 can be used. HD4DP v2 WEB is not available for this project.


In the following sections, we will provide you with information on how to proceed with the application HD4DP v2.

manager Tue, 10/03/2023 - 13:57

General description of the application HD4DP v2

General description of the application HD4DP v2

The HD4DP version 2.x Local is an electronic data capture (EDC) system: a computerized system designed for the collection of clinical data in electronic format for use in research supporting human public health policy. HD4DP (Health Data for Data providers) replaces the traditional paper-based data collection methodology and the proliferation of websites to streamline data collection and expedite the time to analysis and reporting.

Components and features

The HD4DP version 2.x Local application contains the following major components: NextGen Connect, Form.io, HD Connect (LOCAL Proxy), Local datawarehouse.

NextGen Connect

NextGen Connect is a health care integration engine that translates message standards into the standard required by the receiving system, including data formats and standards like HL7, DICOM, ANSI X12, ASCII, and XML. Main functionalities are filtering, transformation, extraction and routing.

The NextGen Connect component is used to handle all integrations within HD4DP 2.0 itself but also all integrations with the external world.

Data collections API: The form.io server offers a REST API which can be used to submit data for each known data collection. Data provider Master Systems cannot access this API directly but need to use the API exposed by the NextGen Connect component. This API is simply a proxy for the form.io API, but allows extra features on top of the form.io API such as security, monitoring, throttling, …

CSV API: For each data collection data can be submitted file-based using a CSV. A CSV can contain multiple data entries for a single data collection definition. These data entries are transformed and pushed by the NextGen Connect component towards the form.io server for potential manual post-processing and validation.

HL7 FHIR API: For some data collections an HL7 FHIR API will be available. The NextGen Connect component performs the transformation towards the Data Collections API and push the data into the form.io server.

Data delivery: the NextGen Connect component handles all routing of data towards the external world. This means it verifies the form.io server for completed data entries which have not yet been delivered. For each data entry that needs to be delivered, it determines where to send the data to, how it needs to be transformed and how it needs to be split. It performs all these actions in a guaranteed delivery fashion: it makes sure the data reaches its destination, possibly retrying when something went wrong.

Feedback: the NextGen Connect component coordinates the receival of feedback, potentially transforming it and pushing it towards the respective data collection entry using the data collections API.

Form.io

Form.io is a data management platform that includes a form builder with a drag and drop interface, management of data with complete API platform, management of users, offline forms, dynamic forms, automatic creation of API, and application embedding. In HD4DP v2, an Angular frontend application is available on top of the form.io server. This application provides a user interface to data providers in which they can see the different data collections for which they are allowed to record and submit data manually. A form.io backend server is responsible for providing the form definitions and registrations of new/updated entries.

HD Connect (LOCAL Proxy)

The HD Connect component is used to retrieve metadata from Master Data Management Database (MDM DB) residing on healthdata.be side.

Local datawarehouse

Each and every change in data entries on the form.io server is pushed towards the local datawarehouse (Local DWH) for easy reporting and data extraction. This local DWH consists of a PostgreSQL database.

Installation and maintenance

The application HD4DP v2 Local is provided without cost and installed remotely on the infrastructure of the healthcare organization by healthdata.be. Healthcare organizations are provided the system requirements for installation of HD4DP v2 application. Healthcare organizations that cannot provide the system requirements can opt to request access and use of a HD4DP v2 Local application of another healthcare organization. Healthcare organizations that cannot provide the system requirements and cannot access and use a HD4DP v2 Local application of another healthcare organization, can request access and use of HD4DP v2 WEB hosted by healthdata.be.

The application HD4DP v2 Local is maintained without cost remotely on the infrastructure of the healthcare organization by healthdata.be. The infrastructure on which the application HD4DP v2 Local is installed, should be maintained by the healthcare organization.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please send us an email via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!



Bart.Servaes Tue, 04/04/2023 - 11:01

Position of HD4DP v2 in HD Architecture 2.0

Position of HD4DP v2 in HD Architecture 2.0
Bart.Servaes Tue, 04/04/2023 - 11:02

User manual of the application HD4DP v2

User manual of the application HD4DP v2

In this manual we describe the following functions of the application HD4DP v2:

Bart.Servaes Tue, 04/04/2023 - 11:02

Request access to an HD application for a specific project

Request access to an HD application for a specific project

Healthdata.be applications such as HD4DP v2 and healthstat.be process sensitive personal information. Therefore, strictly controlled processes are used to grant access to these applications. The Entity Access Management (EAM) portal of healthdata.be facilitates these processes.

Due to the migration from EAM version 2.7 to EAM version 3.0 both systems will exist parallel during the transition period. Make sure that you always use the version currently available for your organization.

Below you will find the links to the user manuals to the different EAM systems. When selecting the desired version, the manual will appear in a separate tab.

When requesting access via the EAM portal version 2.7, go here.

When requesting access via the EAM portal version 3.0, go here.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Sun, 01/07/2024 - 12:07

User roles in HD4DP v2

User roles in HD4DP v2

Each healthcare organisation has an Access Manager who watches over the access rights to the applications of the own organisation and manages them in the HD Entity Access Management (EAM) system. In this process access requests by healthcare organisation employees are analysed and validated if legitimised. The scope of the accesses granted may differ, which is reflected in various user roles. Based on access rights, following three user roles can be distinguished:

Local Study Lead (author):

The Local Study Lead can:  

  • edit and review all peer registrations (regardless of role) for the study or project;
  • make registrations in HD4DP v2

This role might be but should not be limited to the responsible for the study or project within the participating healthcare institution.

Local Study Associate (author):

The Local Study Associate can: 

  • edit and review the own registrations, not those of other colleagues from the same healthcare organisation participating in the same study or project. The indicated registrations are limited to the patients treated by the Local Study Associate;
  • make registrations in HD4DP v2.

The Local Study Associate is a healthcare provider participating in the study or project. This is reflected in the registration form.

Local Study Support (co-author):

The Local Study Support can: 

  • edit and review registrations belonging to the author group they are linked to;
  • make registrations in HD4DP v2.

A Local Study Associate and Local Study Lead can delegate registration tasks to a Local Study Support. This might be but should not be limited to an administrative assistant or staff from a medical coding department. The Local Study Associate and Local Study Lead are still considered the author of the registration; the Local Study Support is considered the co-author. The Local Study Associate and Local Study Lead can view and modify Local Study Support entries.

By default, only 1 Local Study Lead is intended by healthdata.be (Sciensano) for each project within each organisation. The idea is that only one person is meant to see all submissions for that project within that organisation. This policy prevents users of HD4DP v2 from seeing personal and sensitive information from individuals with whom they do not have a therapeutic relationship. For policy deviations on this, healthcare organisation staff should contact their Data Protection Officer (DPO). 

Remarks:

  • The scope of the access rights does not necessarily reflect the hierarchy within your healthcare organisation.
  • It is up to the Access manager to change roles from/to Local Study Lead, Local Study Associate and Local Study Support. These requests are carried out in the EAM system.
Bart.Servaes Sun, 01/07/2024 - 12:08

Access the application HD4DP v2

Access the application HD4DP v2

To access the application HD4DP v2, you must first request an account. If you do not have an account yet, please consult "Request access to an HD application for a specific project" first.

Once your account has been created and the registry is put in production, you will receive an e-mail with the following information (Note that the text between the [ ] will be adapted):

  • Organization: [RIZIV number - Name] 
  • Login: [email] 
  • Password: [password] 
  • Application URL: [url] 

With these credentials you can access the application HD4DP v2 of your organization:

  1. Go to the url mentioned in the email 
  2. Select "your organization" from the list 
  3. Your organization: [RIZIV number – Name] 
  4. Click on "Next
  5. Fill in your "username" and "password"
  6. Click on "Log in"

Please be sure to log off after making use of the application HD4DP 2.0, or any other Healthdata.be application. Just closing your internet browser does not guarantee that your application with registrations has been closed.

manager Tue, 04/04/2023 - 11:03

Navigate to the BSACC-ME project

Navigate to the BSACC-ME project

When logged in, you will see the Welcome page. In the left dark blue menu you can see all the study programs and projects you have access to.

When you select the study program Belgian Sexual Assault Care Centres, you can see the study project BSACC: Monitoring and Evaluation.

Select the study project BSACC: Monitoring and Evaluation.

You will see that the study project Belgian Sexual Assault Care Centres consists of 6 parts: First registration, Follow-up - Involvement police and prosecutor, Follow-up - Casemanagement contact, Follow-up - Casemanagement redirection, Follow-up - Medical follow-up, Follow-up - Psychological follow-up.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Tue, 04/04/2023 - 11:03

Create a BSACC-ME registration

Create a BSACC-ME registration manager Tue, 04/04/2023 - 11:26

Create a BSACC-ME registration "First registration"

Create a BSACC-ME registration "First registration"

To create a First registration registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "First registration" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:26

Create a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

Create a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

To create a Follow-up - Involvement police and prosecutor registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "Follow-up - Involvement police and prosecutor" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:26

Create a BSACC-ME registration "Follow-up - Casemanagement contact"

Create a BSACC-ME registration "Follow-up - Casemanagement contact"

To create a Follow-up - Casemanagement contact registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "Follow-up - Casemanagement contact" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Thu, 03/30/2023 - 09:12

Create a BSACC-ME registration "Follow-up - Casemanagement redirection"

Create a BSACC-ME registration "Follow-up - Casemanagement redirection"

To create a Follow-up - Casemanagement redirection registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "Follow-up - Casemanagement redirection" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:26

Create a BSACC-ME registration "Follow-up - Medical follow-up"

Create a BSACC-ME registration "Follow-up - Medical follow-up"

To create a Follow-up - Medical follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "Follow-up - Medical follow-up" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Thu, 03/30/2023 - 09:12

Create a BSACC-ME registration "Follow-up - Psychological follow-up"

Create a BSACC-ME registration "Follow-up - Psychological follow-up"

To create a Follow-up - Psychological follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation, select "Follow-up - Psychological follow-up" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version: v1.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

NOTE:

The study section is not always available in the selected language. In that case the text frame pictured below covers the language selection buttons. It automatically disappears after a few seconds.

You will have to select now the desired language with one of the other language buttons:
NL for Dutch, FR for French or EN for English.

In the top right corner of the screen you can find a green button "+ New registration". Select this button.

After selection of the "+ New registration" button the main screen will be replaced by 2 sections: a study form in the middle of the screen and a table of contents on the right-hand side of the screen.

By completing the study form you will create a registration for the respective study project.

Table of contents

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: clicking on a section in the table of contents will take you to this section in the study form.

Progress

By selecting the tab "Progress" on the right-hand side of the screen, the table of contents will be replaced by a progress bar and a list of open validation errors).

You can use the list of open validation errors to navigate through the study form: selection of a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can save or submit this registration: Save or Submit. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can save but not submit this registration: Save but not submit. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration

Find a BSACC-ME registration manager Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration "First registration"

Find a BSACC-ME registration "First registration"

To find a First registration registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "First registration" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

Find a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

To find a Follow-up - Involvement police and prosecutor registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Involvement police and prosecutor" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration "Follow-up - Casemanagement contact"

Find a BSACC-ME registration "Follow-up - Casemanagement contact"

To find a Follow-up - Casemanagement contact registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement contact" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration "Follow-up - Casemanagement redirection"

Find a BSACC-ME registration "Follow-up - Casemanagement redirection"

To find a Follow-up - Casemanagement redirection registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement redirection" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:27

Find a BSACC-ME registration "Follow-up - Medical follow-up"

Find a BSACC-ME registration "Follow-up - Medical follow-up"

To find a Follow-up - Medical follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Medical follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:29

Find a BSACC-ME registration "Follow-up - Psychological follow-up"

Find a BSACC-ME registration "Follow-up - Psychological follow-up"

To find a Follow-up - Psychological follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Psychological follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

In the header of the overview table, you can use the filter below each column label.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:28

Update a BSACC-ME registration

Update a BSACC-ME registration manager Tue, 04/04/2023 - 11:28

Update a BSACC-ME registration "First registration"

Update a BSACC-ME registration "First registration"

To update a First registration registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "First registration" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:28

Update a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

Update a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

To update a Follow-up - Involvement police and prosecutor registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Involvement police and prosecutor" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:28

Update a BSACC-ME registration "Follow-up - Casemanagement contact"

Update a BSACC-ME registration "Follow-up - Casemanagement contact"

To update a Follow-up - Casemanagement contact registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement contact" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:28

Update a BSACC-ME registration "Follow-up - Casemanagement redirection"

Update a BSACC-ME registration "Follow-up - Casemanagement redirection"

To update a Follow-up - Casemanagement redirection registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement redirection" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:29

Update a BSACC-ME registration "Follow-up - Medical follow-up"

Update a BSACC-ME registration "Follow-up - Medical follow-up"

To update a Follow-up - Medical follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Medical follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:39

Update a BSACC-ME registration "Follow-up - Psychological follow-up"

Update a BSACC-ME registration "Follow-up - Psychological follow-up"

To update a Follow-up - Psychological follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Psychological follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to update.

If you have found the registration, you can open the study form of the registration by clicking on the corresponding row in the overview table.

You can complete the missing fields and / or change previously completed fields in the study form.

At the end of the study form you can Save or Submit the registration.

A Spine Surgery registration can be updated as long as the registration has not yet been submitted. If the status of a registration is "Saved", the registration can still be updated.

If you save the registration, you can still edit it. A submitted registration can no longer be modified or deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:39

Delete a BSACC-ME registration

Delete a BSACC-ME registration manager Tue, 04/04/2023 - 11:39

Delete a BSACC-ME registration "First registration"

Delete a BSACC-ME registration "First registration"

To delete a First registration registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "First registration" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:39

Delete a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

Delete a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

To delete a Follow-up - Involvement police and prosecutor registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Involvement police and prosecutor" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:40

Delete a BSACC-ME registration "Follow-up - Casemanagement contact"

Delete a BSACC-ME registration "Follow-up - Casemanagement contact"

To delete a Follow-up - Casemanagement contact registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement contact" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:40

Delete a BSACC-ME registration "Follow-up - Casemanagement redirection"

Delete a BSACC-ME registration "Follow-up - Casemanagement redirection"

To delete a Follow-up - Casemanagement redirection registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Casemanagement redirection" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:40

Delete a BSACC-ME registration "Medical follow-up"

Delete a BSACC-ME registration "Medical follow-up"

To delete a Follow-up - Medical follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Medical follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:40

Delete a BSACC-ME registration "Psychological follow-up"

Delete a BSACC-ME registration "Psychological follow-up"

To delete a Follow-up - Psychological follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and Evaluation select "Follow-up - Psychological follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the overview table to find the registration you want to delete.

Once you have found the registration you want to delete, you must select the registration by checking the checkbox at the beginning of the row in the overview table.

Then you need to press the "Actions" button at the top right of the summary table.

There are now two options, "Submit" and "Delete". Now press "Delete".

After you press "Delete," a pop-up message will appear asking you to confirm the deletion of the selected registration(s). If you are sure about this action, press "Confirm." If not, press "Cancel."

If you delete the registration, you cannot change its status or content.

The deleted registration will not be removed from the summary table. It remains present, but the status has changed from "Open" to "Deleted".

If you want to see only Open and Sent registrations, you can adjust the filter on the "Status" item in the summary table.

A registration can be deleted as long as the registration has not yet been submitted. If the status of a registration is "Open", the registration can still be deleted.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:40

Submit a BSACC-ME registration

Submit a BSACC-ME registration manager Tue, 04/04/2023 - 11:40

Submit a BSACC-ME registration "First registration"

Submit a BSACC-ME registration "First registration"

To submit a First registration registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "First registration" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:41

Submit a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

Submit a BSACC-ME registration "Follow-up - Involvement police and prosecutor"

To submit a Follow-up - Involvement police and prosecutor registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "Follow-up - Involvement police and prosecutor" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:41

Submit a BSACC-ME registration "Follow-up - Casemanagement contact"

Submit a BSACC-ME registration "Follow-up - Casemanagement contact"

To submit a Follow-up - Casemanagement contact registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "Follow-up - Casemanagement contact" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:41

Submit a BSACC-ME registration "Follow-up - Casemanagement redirection"

Submit a BSACC-ME registration "Follow-up - Casemanagement redirection"

To submit a Follow-up - Casemanagement redirection registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "Follow-up - Casemanagement redirection" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:41

Submit a BSACC-ME registration "Follow-up - Medical follow-up"

Submit a BSACC-ME registration "Follow-up - Medical follow-up"

To submit a Follow-up - Medical follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "Follow-up - Medical follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:41

Submit a BSACC-ME registration "Psychological follow-up"

Submit a BSACC-ME registration "Psychological follow-up"

To submit a Follow-up - Psychological follow-up registration for the study project Belgian Sexual Assault Care Centres: Monitoring and evaluation using the overview table, select "Follow-up - Psychological follow-up" in the dark blue left menu.

When you select a version of this study section, you will see the overview table in the main part of your screen. This table contains, among other things: Registration ID, Progress, Author, Co-author, Unique ID, Business Key, Registration Code, National Patient Registry Number…

Use the filters in the header of the table to find the registration(s) you want to submit. For example, you can use the filters "Status" (set to "Open") and "Validation Errors" (set to "0") to find the registrations that are eligible for submission.

Once you have found the registration(s) you want to submit, you must select the registration(s) by checking the checkbox at the beginning of the row in the overview table.

Then you need to select the "Actions" button at the top right of the overview table.

Two options will be available: "Submit" and "Delete". Select "Submit".

After you have selected "Submit," a pop-up message will appear asking you to confirm the submission of the selected registration(s). If you are sure about this action, click on "Confirm." If not, click on "Cancel."

Once you have confirmed the submission, you can't change the content of the registration(s) anymore. Submitted registrations can also no longer be deleted.

The submitted registration remains present in the overview table, but the status has changed from "Open" to "Submitted".

If you want to see only "Open" registrations, you can adjust the filter on the "Status" item in the overview table.

A registration can be submitted at the end of the creation process using the study form (see: Create a [project name] registration).

When the registration was completed using the study form, saved and there are no more validation errors, the registration can also be submitted via the overview table. This method can be useful to submit multiple registrations in the same action.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
Bart.Servaes Tue, 04/04/2023 - 11:42

Send a correction of a registration

Send a correction of a registration

To send a correction of a submitted registration you need to submit the complete record again. An overview of the submitted corrections is available via the HD4DP v2 generic correction form.

The Add corrections function (and button) to a registration form has been discontinued. It is not available anymore, neither via the overview table, nor via the preview page of a registration.

Submitting the complete record again

The preferred way to send a correction is to fill out the complete registration form with the correct values and resubmit it. When you do so, the most recent version of the record that is received by healthdata.be will be considered to be the correct one.

Whether a record qualifies or not is determined by a so-called business key. This is a unique set of values of specific fields per record, such as a combination of the patient ID and the hospitalization date, or the niss code and the sample ID. The business key is created when submitting the original record, and so helps to identify the most recent record received in the healthdata.be database in case of resubmission.

Attention: In case one of the fields that build the business key needs to be corrected, the record that will be resubmitted will have a different business key. Consequently, both records will be considered as correct ones, since there is no identical business key.
You may consider to log a RITM ticket via our Service portal (https://sciensano.service-now.com/sp) to follow-up on this particular case.

There are two options to resubmit a record:

Option 1: Submission via S2S API / CSV Upload

The correction of the values is performed directly in the json or csv file. To resubmit the complete record via the back-end, please refer to the applicable technical documentation pages. The examples shown in the links below are for Pacemaker Primo-Implantation:

  • For submitting the complete record as a .json file via S2S API, go here.
  • For submitting the complete record as a .csv file via CSV Upload, go here.

Option 2: Submission via the HD4DP 2.0 web application

First, you need to access the HD4DP v2 web application, navigate to the study program and select the desired study project in the left dark blue menu. Then, fill out the complete registration form again manually with the correct values. Resubmit the completed registration form.

The previously submitted record will become irrelevant based on the business key.

The generic correction form

The Correction Form you can find in the list of study programmes and study projects in the HD4DP v2 web application contains an overview of all submitted corrections of registrations.

If you want to preview these corrections of registrations, navigate to the study program Correction form and then to the study project Correction form. Finally, select the most recent version.

The corrections of registrations of the different projects will be displayed READ-ONLY in the overview table.

Bart.Servaes Tue, 01/02/2024 - 13:42

Registration statuses in HD4DP v2

Registration statuses in HD4DP v2

This article explains the different registration statuses in HD4DP v2.

Statuses are shown in Status column

You can select the columns you want to display via the menu Select visible columns located in the top-right corner:

Select the columns you want to display and click on Apply.

Description of the statuses:

Open: Registration is created and stored. It has not been submitted

Deleted: Registration has been deleted.

Submitted: Registration has been submitted and sent.

Bart.Servaes Tue, 04/04/2023 - 11:42

Reset password for HD4DP v2

Reset password for HD4DP v2

After having received your credentials to login to the HD4DP 2.0 application, you can consider to reset the password to one that is easier for you to remember.

Go to URL https://acc.kubes.healthdata.be/, select your organization and click on the Next button.

Fill in your e-mail address and the password you received. Click on the Log in button.

The main HD4DP 2.0 application screen appears. On the left you can see the menu of study programmes and study projects, on the right you have the section in which the relevant registrations will become available.

At the top right of the screen you notice the Reset password link. Click on it.

Reset the password you have received by filling in the password of your preference. Repeat the new password in the verification field and click on the Submit button.

You will be redirected to the main screen, and the password will be automatically reset in the background. You don't need to log in again now.

When logging back in for a next registration session you will have to use your new password.

Jonas.VanBussel Sun, 01/07/2024 - 15:17

Technical manual of the application HD4DP v2

Technical manual of the application HD4DP v2

For the sake of consistency within the project navigation the titles of the respective components have been translated in NL and FR. The content, however, is only available in English. Please select the EN language button in the top-right corner of your screen, when you are still in the NL or FR environment.

Bart.Servaes Mon, 02/13/2023 - 15:33

Technical user roles in HD4DP v2

Technical user roles in HD4DP v2

IT administrator: An IT administrator has the highest level of all roles and permissions and can:

  1. log in using Active Director;
  2. grant access to Local Study Lead, Local Study Associate and Local Study Support;
  3. select and access all projects;
  4. create, find, update, delete, send (to healthdata.be, MyCareNet and other destinations) and correct a record using the form.io component;
  5. create, update, send and correct a record using the API data collection;
  6. create, update, send and correct a record using CSV upload;
  7. create and send a MyCareNet record using MyCareNet XML;
  8. view all records for all projects;
  9. harvest all records for all projects from the local DWH using the PostgreSQL database.

Bart.Servaes Tue, 04/04/2023 - 11:42

HD4DP v2 Installation

HD4DP v2 Installation

HD4DP v2 Local is an application installed on the infrastructure of the Health Care Organisation participating in research projects facilitated by healthdata.be.

The installation of HD4DP v2 Local is executed by the DevOps team of healthdata.be.

Server Installation and Configuration

Installing and configuring the server requires the following actions:

The HD4DP v2 application is more modular and will support scaling up to meet the requirements of the various data collection projects we facilitate. It will offer several micro-services that will run concurrently on the same machine.

The server should therefore require more resources than the one currently hosting the HD4DP 1.0 application. Furthermore, the resources allocated should be increased.  It is therefore on the one hand imperative to use virtualization for the creation of the machine. On the other hand. It is also imperative to store files and make regular backups to a file server.

Below we take up our three categories of organizations sending data to healthdata.be and the resources we recommend allocating to their virtual machine:

  • “Small”: Small data provider.
  • “Medium”: Medium data provider;
  • “Large”: Big data provider.

Finally, we also offer the possibility for each hospital to have an integration server and a production server. Healthdata.be will deploy the new release of the application on the integration server. This will allow you to accept or decline the promotion of a new release of the HD4DP 2.0 application to the production server. This option is highly recommended, but not mandatory.

Therefore, could you answer the question: Do you want to first deploy HD4DP on an integration server? Yes/No. If Yes, Could you provide a server whose label used for specifications is ‘Small’ (following the instructions in section 1 of this mail), that is:

  • Processors number: 1
  • Physical cores/Processor : 8
  • RAM memory : 16 Go
  • Disk space: 100 Go
  • Network Station Mount with Space for Backups
  • Operating System: Linux Ubuntu v18.04
  • Virtualization

Server installation timing

In order to establish the deployment schedule for the HD4DP 2.0 application within your organization, we would like to know when the server could be installed and configured. To this end, could you give us the 2 dates relating to the installation of the server:

  • Starting date ;
  • Finalization date.

Based on these dates, an employee of healthdata.be will regularly monitor the operations linked to the installation of the server.

For any request for information on installing the HD4DP 2.0 server, please send an email to hd-architecture-20@sciensano.be.

Bart.Servaes Tue, 04/04/2023 - 11:43

HD4DP v2 Infrastructure instructions

HD4DP v2 Infrastructure instructions

Introduction

This document is written for IT staff / system engineers of data providers and therefore assumes technical knowledge. It acts as a guide through the on-boarding process of HD4DP v2 and covers installation of the server, user configuration, network configuration and remote access.

The order of steps in this document should be respected during execution.

If you need more informationor have any questions, feel free to contact us.

Overview

HD4DP v2 consists of a modular application stack, which allows Healthdata to seamlessly upgrade individual elements.

An HD4DP v2 deployment comprises of following components:

  • Form.io component
  • MongoDB
  • PostgreSQL
  • Nextgen Connect

As it is the case in HD4DP 1.0, an Encryption Module with a connection to the eHealthBox is still required for HD4DP v2 and must be provided by the data provider.

Network configuration

IP

The HD4DP server needs to be accessible via domain names in DNS, and must have a static IP in your private network.

DNS

The application stack of HD4DP v2 requires four domain names pointing to the IP of the locally installed HD4DP v2 server. Use the following names in your DNS:

  • nextgenconnect.hd4dp.<yourdomain.be>
  • hd4dp.<yourdomain.be>
  • metabase.hd4dp.<yourdomain.be>
  • admin.hd4dp.<yourdomain.be>

Firewall

The following connections should be possible in the firewall flow:

  • To and from (a) machine(s) in your IT department on port 22 for initial configuration and local support.
  • To and from the Encryption Module server. The protocol and ports depend on your local EM implementation. Contact your EM vendor if more information is necessary.
  • Reachable by your staff who uses HD4DP, on ports 80 and 443 for HTTP(s) traffic.
  • To and from the LDAP server (this is not mandatory if you are not using LDAP to authenticate) (port 389 by default)

The Healthdata proxy server is used as a gateway to the internet for the security of HD4DP servers. The configuration of this proxy server will be provided to you by Healthdata at a later date.

Server installation

To install the application stack of HD4DP v2, Healthdata requires a fresh installed operating system, specifically Ubuntu Server 22.04 LTS.

Please use these instructions even if you have previous experience with installing this operating system, as its configuration is specific for Healthdata.

These instructions assume that the network configuration described in the previous section is completed.

Instructions

HD4DP v2 requires a (virtual) machine running Ubuntu Server 22.04 LTS.

We assume knowledge of loading an .iso file onto a (virtual) machine. Healthdata can’t provide instructions for this, as the environment of your center is unknown. Should you have any trouble, however, please contact Healthdata support so that we can help out.

Please find the installation steps below.

Installation steps

  1. Download the .iso file from the link below.
    Download Ubuntu Server 22.04 LTS
  2. Create a new (virtual) machine with Linux Ubuntu 64 bit as the OS family
  3. When prompted, select the .iso file downloaded in step 1.
  4. After some time, you will be prompted to select a system language. Select English.
  5. “Keyboard configuration”
    Select your preferred keyboard layout and press enter
  6. “Network Connections”
    Highlight the network interface and press enter. Navigate as follows:
    Edit IPv4 -> Manual -> enter the network details -> save -> Done
  7. Proxy IP -> Leave default/empty.
  8. “Configure Ubuntu Archive Mirror” -> leave default
  9. “File system Setup” -> Use An Entire Disk
  10. Proceed until “Confirm destructive action” -> press continue. The installation process starts, this can take several minutes.
  11. In the meantime, create the user for Healthdata.
    username = healthdata,
    Password = choose a secure password and communicate it to Healthdata.
  12. Mark “Install OpenSSH server”. This will be used for remote access. “Import SSH Identity” -> no -> done
  13. “Featured Server Snaps” -> Select nothing and press Done.
  14. Wait until installation is finished.

Configuration steps

Connecting to the server

Log into the machine with the Healthdata user created in the previous section.

Instructions (from a Windows machine):

  1. Install the tool Putty and open the application.
  2. On the configuration screen, enter the following (replace cursive text with the appropriate values)
    • Host Name: healthdata@server_private_ip
    • Port: 22
    • Connection type: SSH
  3. Click Open. Enter the Healthdata password (you will not see text as you type, you can paste into putty by right-clicking in the terminal).
  4. You should now be logged in and see a prompt  “healthdata@server_name:~$”

Administrator account for internal use

An administrator account for internal use can be created on the HD4DP v2 server.

The configuration of remote access (described below) should not happen on this account, but on the Healthdata account.

The internal account can later be used to install and configure OS monitoring software and antivirus software by the internal IT team. For more information, see the section on Antivirus and Monitoring.

(Text with a gray background should be entered as a command in the terminal of the server)

Create the user:

            sudo adduser <username>

Add the user to the sudo group

            sudo usermod -aG sudo <username>

Installation and configuration of the software stack

Healthdata.be support will instruct you when to execute the next step, which is to enable remote access so that Healthdata can execute the software installation and configuration.

Backups

The configuration of the HD4DP v2 server is administered by Healthdata and does not require backups.

HD4DP v2 regularly dumps its databases automatically to the /backup directory on the server. A network storage should be mounted at this location.

Please fill out the infrastructure sheet with the required credentials, domain name/url, protocol… to connect to the network drive. The connection will then be configured by Healthdata.

Patching and Updates

Healthdata configures HD4DP v2 servers to automatically receive recommended security updates. The choice for Ubuntu 22.04 is motivated by the long-term support for this version. Security flaws are rare in this distribution, and security updates are quick and often don’t require a system reboot.

If the IT department of your organization prefers to manage patches, this is possible but not encouraged. Please use the account for internal use created in Section Server installation for this purpose.

Antivirus and Monitoring

Most data providers will want to manage their own antivirus and OS monitoring on all machines in their network. Installation of such software on the HD4DP v2 server is allowed, but Healthdata should be informed about all extra software installed on the server. Additionally, Healthdata will not provide support for the installation of this software.

Contact information

https://support.healthdata.be

Email: support.healthdata@sciensano.be

Phone: +32 2 793 01 42 

Bart.Servaes Tue, 04/04/2023 - 11:43

HD4DP v2 Infrastructure Sheet

HD4DP v2 Infrastructure Sheet

The HD4DP v2 Infrastructure Sheet contains information that healthdata.be needs in order to start the installation of the HD4DP 2.0 Software at your organization.

Below you can find the description of the necessary information:

SERVER CONNECTION

Healthdata.be performs its installation and support tasks remotely (using VPN or remote port forwarding via SSH). Please provide the required credentials.

  • Type of connection (VPN / Remote port forwarding via SSH)
  • Link (IF VPN)
  • Username, token, other (if VPN)
  • Password (if VPN)³
  • Public SSH Key (if remote port forwarding)

³ For security reasons, we advise to communicate passwords to us either by phone, or via a link using a secret-sharing service such as onetimesecret.com.

SERVER MACHINE

  • Server Name
  • Internal IP-Address
  • Ram (in GB)
  • CPU (number of CPU's and number of cores)
  • Disk space (in GB)
  • Username: Healthdata
  • Password ³

³ For security reasons, we advise to communicate passwords to us either by phone, or via a link using a secret-sharing service such as onetimesecret.com.

ATTACHED DRIVE FOR BACKUPS

HD4DP 2.0 regularly performs data dumps for backup purposes. Please provide connection information to a network share volume.

  • Link / IP address
  • Path
  • Username
  • Password ³

³ For security reasons, we advise to communicate passwords to us either by phone, or via a link using a secret-sharing service such as onetimesecret.com.

USER MANAGEMENT

HD4DP can either connect to a LDAP server or use its own application database for performing user authentication and management. Please check the user management mechanism you want to use.

  • LDAP user management : Yes / No
  • Application user management : Yes / No

LDAP configuration (Optional)

If you chose ‘LDAP user management’ as user management mechanism, please provide the following information that allows us to connect to your LDAP system.

  • Connection URL
  • Username
  • Password³

³ For security reasons, we advise to communicate passwords to us either by phone, or via a link using a secret-sharing service such as onetimesecret.com.

SOFTWARE CONFIGURATION

Encryption Module interface

HD4DP communicates with the Encryption Module (EM) either using the file system interface or by calling a REST web service. Please choose which interface HD4DP should use for its communication with the Encryption Module.

  • REST web service
  • File system

REST web service interface

If you chose to communicate with the Encryption Module using a REST interface, please provide the web service URLs that should be used by HD4DP for its communication with EM.

  • "Outgoing flow URL: Example: http://host:8080/encryptionmodule/send"
  • "Incoming flow URL : Example: http://host:8080/encryptionmodule/receive"

File system interface

  • "Incoming directory: Directory where HD4DP checks for incoming files"
  • "Incoming directory: Directory where HD4DP writes outgoing files"
  • "Incoming directory: Directory to which HD4DP moves successfully processed files"
  • "Incoming directory: Directory to which HD4DP moves unsuccessfully processed files"
Bart.Servaes Tue, 04/04/2023 - 11:43

Requirements for the HD4DP installation

Requirements for the HD4DP installation

This documentation details the necessary adaptations to be performed in order to allow the necessary technical accesses and smooth operation of the different healthdata.be platforms and interfaces.

The file is available for download below.

Jonas.VanBussel Tue, 02/27/2024 - 11:18

HD4DP v2 S2S API

HD4DP v2 S2S API

The HD4DP v2 S2S API is a unified Application Programming Interface (API) that will allow participating Healthcare Organizations (HCO) to submit DCDs data to HD4DP2.0 fully automated. In the manual of the application HD4DP v2 we provide detailed information about the S2S API:

Important note: For code fields (fieldType = 'CODE') the id of the codeListValue item must be sent, not the code value or the label. In future releases it will be made possible to also send the code value.

Please read this documentation before its project specific use.

The study project Belgian Sexual Assault Care Centers: Monitoring and Evaluation (BSACC-ME) consists of 6 DCD's: 

  • First registration
  • Follow-up - Involvement police and prosecutor
  • Follow-up - Casemanagement contact
  • Follow-up - Casemanagement redirection
  • Follow-up - Medical follow-up
  • Follow-up - Psychological follow-up

On the following pages we explain how to submit data for Belgian Sexual Assault Care Centers: Monitoring and Evaluation using the HD4DP v2 S2S API.

This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Wed, 05/31/2023 - 15:19

S2S API for BSACC-ME First Registration

S2S API for BSACC-ME First Registration

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - First registration the format would be:
HD_DCD_submjson_HDBP0242_BsaccMeBsaccReprt_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:23

S2S API for BSACC-ME Police And Public Prosecutor Follow-Up

S2S API for BSACC-ME Police And Public Prosecutor Follow-Up

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Police and public prosecutor Follow-up the format would be:
HD_DCD_submjson_HDBP0242_BsaccMeBsaccFuPolce_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:27

S2S API for BSACC-ME Follow-up - Casemanagement Contact

S2S API for BSACC-ME Follow-up - Casemanagement Contact

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Case management contact Follow-up the format would be:
HD_DCD_submjson_HDBP0242_BsaccMeBsaccFuCont_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:33

S2S API for BSACC-ME Case Management Redirection Follow-Up

S2S API for BSACC-ME Case Management Redirection Follow-Up

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Case management redirection Follow-up the format would be:
HD_DCD_submjson_HDBP0242_BsaccMeBsaccFuReferral_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:35

S2S API for BSACC-ME Follow-up - Medical follow-up

S2S API for BSACC-ME Follow-up - Medical follow-up

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Medical Follow-up the format would be:
HD_DCD_submjson_hdbp0242_BsaccMeBsaccFuMed_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:37

S2S API for BSACC-ME Psychological Follow-Up

S2S API for BSACC-ME Psychological Follow-Up

Documentation for System 2 System API on Architecture 2.0

Description of the service

API is the acronym for Application Programming Interface, which is a software intermediary that allows two applications to talk to each other.

In this case, the API is used to have the system of the Data Providers communicate with the system of HealthData.

The S2S API is a unified API that will allow clients (Data Providers) to submit DCDs data to HD4DP2.0 in fully automated way.

End point information (per DCD) + examples

APIResponseNotes
/api/organizationsList of organizations. Client
must select the right
organizationId
Current existing end-point is:
/api/installation/organizations

We’ll create this new end-point with a
different signature re-routing the call to
this existing one or we will refactor the
existing one to this new signature.
/api/dcd/menu/structure?
organization-id={organizationId}
List of projects of the given
organization, dcds of each project, dcdVersions of each dcd in a JSON format
Client can get dcdId and dcdVersionId
(optional) which are needed on following API calls.
/api/dcd/payload/definition? 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>language-id={languageId} 
List of all the fields of the form as well as their corresponding data-types that are allowed in the json data structure for the  Payload   This field names values are the key properties in the formIO json config form. When we implement this new api end-point, we need to parse the json content in order to get the key properties. Given these field keys, we’ll get each field definition from new API end-points helpers: 
 
/api/dcd/field?field-id={fieldId} 
/api/dcd/codelist?codelist-id={codelistId} 
 
These ones are described in the next table. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
 
<optional parameter> language-id = {languageId} : language id for the code_list example results. If this parameter is not provided, default language will be English. Current permitted values: 
en: English 
nl: Dutch 
fr: French 
 
Client must build this json object as the payload data to be sent based on this list of fields, on the last api call 
/api/dcd/payload/example?dcd-id={dcdId}; 
<optional>version={version} 
Example of payload in JSON format Providing this API end-point in order to help the Client on the Payload build with an example 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
/api/dcd/payload/submit? 
organization-id={organizationId}; 
dcd-id={dcdId}; 
<optional>version={version}; 
<optional>data-src-type={dataSrcType}; 
 
POST Payload 
 
Some implementation tasks is needed in here in order to return the result info (either succeed or failed).  
Similar like the one in HDConnectProxyRestTemplate.postCsv method, and the CsvExecutionResult object build. 
 
<optional parameter> version={version} : If this parameter is not provided, latest one is assumed. 
 
<optional parameter> data-src-type={dataSrcType} :  
permitted values:  
API 
CSV 
If this parameter is not provided, default values is <HD4DP>. 
api/dcd/submit?organization-id={organizationtId};dcd-id={dcd-id};<optional>dcd-version-id={dcdVersionId};<optional>incl-submit-data={inclSubmitData}; <optional>incl-submit-results={inclSubmitResults}; 
GET method 
 
List of submitted dcds data and/or their corresponding business keys or validation errors.  
 
<optional parameter> dcd-version-id={dcdVersionId} : If this parameter is not provided, lastest one is assumed 
 
<optional parameter> incl-submit-data={inclSubmitData} : If this parameter is not provided, default values is <false> 
 
<optional parameter> incl-submit-results={inclSubmitResults} : If this parameter is not provided, default values is <true> 
 

HOW TO: Upload data using System 2 System

Steps To Upload data

1. IT services of data providers must setup their systems to be able to communicate with HD4DP v2 System 2 System API

A prerequisite to be able to use the Health Data's System 2 System API, is that the IT services of the hospitals must have the following in place before the systems can communicate:

  • The endpoint/URL is protected by credentials for which the support services need to be contacted.
  • End-to-end API process to submit DCD registrations in a fully automated manner.
  • Support for searching submitted DCD registrations.

2. Prepare the JSON file (example file in this section)

To send DCD registrations to Health Data, the file must be in a .json file format.

  • At the Data Provider's side, we must foresee a way to extract the JSON file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author group, Author and Coauthor has been left out in the json file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author group, Author and Coauthor are specified in the json file, the following fields TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the json file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, to submit a draft, the only thing to add is the key STATUS (all upper case) with the value "draft" to the request, as described in Submission of drafts.
  • Adding separators to a NISS number:
    It is not necessary to necessary to add separators in a NISS number when uploading a file using S2S API. You can fill the NISS number out both with or without seperators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
This image has an empty alt attribute


  • Make sure the name of the JSON file has the correct format:
    HD_DCD_submjson_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Psychological Follow-up the format would be : HD_DCD_submjson_HDBP0242_BsaccMeBsaccFuPsychc_01_20221220.json

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

3. Uploading the JSON File

  • The IT department of the Data Provider must provide a manner in their system to send the API requests containing DCD registrations in a JSON file format, the correct end-points must be addressed.
  • In this case the end-point to upload the json file will be:

4. Validate the JSON Upload

4.1 Validation of the S2S API Upload via the response:

Verify in the same way the request was sent, that the returned response is containing a valid Business key.

If a valid Business key has been provided, the registration upload via System 2 System API was succesful.

4.2 Validation of the System 2 System API via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded registration(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:38

HD4DP v2 CSV Upload

HD4DP v2 CSV Upload

The CSV upload functionality enables the import of multiple parameters from a set of patients in one go into HD4DP2.0. The CSV file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP2.0 for the upload of CSV files. If a data provider wants to upload a CSV file, it has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming convention of the CSV file.

Refer to the page(s) hereunder for DCD specific CSV Upload documentation.

manager Fri, 05/26/2023 - 16:55

CSV Upload for BSACC-ME First registration

CSV Upload for BSACC-ME First registration

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - First registration the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccReprt_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

<Screenshot of result file of the DCD>

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

<Screenshot of result file of the DCD>

Step 5: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

<Screenshot of result file of the DCD>

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

peter.luijpers Thu, 02/22/2024 - 22:40

CSV Upload for BSACC-ME Police And Public Prosecutor Follow-Up

CSV Upload for BSACC-ME Police And Public Prosecutor Follow-Up

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Police and public prosecutor Follow-up the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccFuPolce_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:40

CSV Upload for BSACC-ME Case Management Contact Follow-Up

CSV Upload for BSACC-ME Case Management Contact Follow-Up

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Case management contact Follow-Up the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccFuCont_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:41

CSV Upload for BSACC-ME Follow-up - Casemanagement redirection

CSV Upload for BSACC-ME Follow-up - Casemanagement redirection

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Case management redirection Follow-up the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccFuReferral_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:41

CSV Upload for BSACC-ME for Medical Follow-Up

CSV Upload for BSACC-ME for Medical Follow-Up

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Medical Follow-up the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccFuMed_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:41

CSV Upload for BSACC-ME Follow-up - Psychological follow-up

CSV Upload for BSACC-ME Follow-up - Psychological follow-up

Documentation for CSV Upload on Architecture 2.0

Description of the service

The CSV Upload functionality gives the possibility to import multiple parameters from a set of patients in one time into HD4DP 2.0. The csv file is based on an extract of the electronic patient files and/or other local databases.

Currently there is no user interface in HD4DP 2.0 for uploading csv files. If a data provider wants to upload a csv file, the file has to be dropped at a specific location. These files will be picked up and processed periodically. The files should be “final”, meaning that no application is writing to them. The pick-up location will be identical for all registries.
Pre-registry handling will be based on a naming-convention of the csv file.

HOW TO: Upload data using CSV Upload

Steps To Upload data

1. Prepare the csv file (example file in this section)

  • Extract the csv file from the electronic patient files and/or other local databases.
  • Author group, Author and Coauthor:
    • When the Author Group, Author and Coauthor have been left out in the csv file, the default Author group, Author and Coauthor will be used automatically.
    • When the desired Author Group, Author and Coauthor are specified in the csv file, the following headers TX_AUTHOR_GR, TX_AUTHOR and TX_COAUTHOR must be added to the csv file with their values respectively.

      Example:
TX_AUTHOR_GR;TX_AUTHOR;TX_COAUTHOR
Test group;test@sciensano.be;test@sciensano.be

Note:
The Author group, Author and Coauthor must exist and are well configured at the back-end of the system. TX_AUTHOR_GR can be a string that identifies the Author group to which this Author belongs. Commonly, the first name and last name are used to identify the TX_AUTHOR_GROUP. Be sure to avoid leading and trailing spaces when entering the Author group value.

  • Similarly, add the field name 'STATUS' in capitals in an additional column. Add the value 'draft' in case a manual submission of the record is requested.
    If not, the record will be submitted without manual intervention.
  • Adding separators to a NISS number:
    It is not necessary to add separators in a NISS number when uploading a file using CSV Upload. You can fill out the NISS number both with or without separators. E.g.: 85.04.02-169.32 or 85040216932.

    Example:
  • Make sure the name of the csv file has the correct format:
    HD_DCD_submcsv_HDBPnumber_HDBPabbreviation_versionnumber_versionreleasedate

So for BSACC-ME - Psychological Follow-up the format would be:
HD_DCD_submcsv_HDBP0242_BsaccMeBsaccFuPsychc_01_20221220.csv

EXAMPLES:

Disclaimer: The example files above are only provided as a guideline and do not contain real life data.

2. Uploading the csv file

Step 1: Open the sftp tool like WinSCP

Step 2: Get the credentials (Host name, Port number, User name and Password) from the IT department of the Data Provider, to log on to the sftp server located on the Data Provider side. See section Data transfer via an SFTP client in the documentation of the Online Acceptance Environment.

Step 3: Fill in the credentials into the Login screen and click on Login to be able to access the different upload folders:

Note: a warning might be given, just click on Update

Now the CSV Upload folder structure is displayed on the right-hand side panel. You will notice draftcsv folders and submcsv folders for the diverse HD business projects. Historically, a directly submitted csv file would end up in the submitted folder, whereas a csv file featuring ‘draft’ in the status field would have ended up in the draft folder. At this stage there is no real distinction between both folders, so you can save the csv file in either of them.
Attention: If you wish to create a draft to work on at a later stage, don’t forget to add ‘draft’ in the status column of the csv file.

Step 4: Select the project folder BSACC:MonitoringandEvaluation-19 and open it by double-clicking on it:

Step 5: Double-click on the DCD folder to open it:

Step 6: Now go to the folder on the left-hand side panel where the CSV file to be uploaded is located:

Step 7: Drag the CSV file to be uploaded from the left-hand side panel into the folder on the right-hand side panel:

Step 8: Wait until the polling system of the CSV Uploader has picked up the CSV file and has processed it.
Once the CSV file has been processed it will disappear from the folder, when we refresh the page manually!

3. Validate csv upload

Once the csv file has been processed 3 folders will be created (if they haven't been created already) in the DCD folder:

  • ARCHIVE (after a csv file has been processed, the original csv file will be saved in this folder)
  • RESULT (when the csv file is placed in this folder, it means that the csv file has been processed, a file will be created or (or appended, if the file already existed) with the result of the upload of the csv file).
    All the errors that are described in this file are business related, which means that they are technically correct, but in violation with the business rules or contain wrong values for that field.
  • ERROR (when the csv file is placed in this folder, it means that a technical error has occurred like the csv file contained erroneous formatting. The csv file won't get processed and an error file will be created with the errors and reason why the csv file couldn't be processed)

3.1 Validation of the csv upload via sftp tool:

Step 1: Double-click on the ERROR folder to open it, click on the refresh button and verify that there is no error file present.

Step 2: Return to the DCD folder. Now double-click on the RESULT folder to open it, click on the refresh button and verify that the result file is present.

Step 3: Double-click on the result file to open it.

Step 4: If there are multiple records in the result file, scroll to the entry of the current csv upload by looking at the upload date (Started at dd/mm/yyyy hh:mm).
Verify the result file that the upload was successful by searching for the word SUCCESS and having a look at the Status. This Status must contain: Success;Success Count:1;Error Count:0

3.2 Validation of the csv upload via HD4DP 2.0:

Step 1: Open the web application HD4DP 2.0.

Step 2: Select the concerned organization in the dropdown list and click on Volgende (Next)

Step 3: Fill in the username and password, that has been provided by your IT Department or Healthdata team, and click on Log in to access the HD4DP 2.0 application.

Step 4: Navigate in the menu on the left-hand side panel to the desired study program:

Step 5: Check that the uploaded DCD(s) is/are displayed in the overview table.

faycel.mbarki Thu, 02/22/2024 - 22:21

Databases

Databases Bart.Servaes Fri, 02/16/2024 - 10:53

Retrieve BSACC-ME data from the local database of HD4DP v2

Retrieve BSACC-ME data from the local database of HD4DP v2

Warning

The person with the login for the local database of "HD4DP v2 local" has access to all the data stored in the database. This means that the personal data of the patients will be VISIBLE to that user.

Requirements

URL Local DWH Database: postgresql://<server_ip>:5432/localdwh. If this is not the case, the IT department hosting HD4DP v2 needs to open the port and allow traffic to this port.

URL NIPPIN Database: postgresql://<server_ip>:5432/nippin

Username/Password: The service desk of healthdata.be will forward, via a secure link, the username and password.

Client: Download one of the clients that support PostgreSQL . A list is available here.

Subnet: Provide us with the subnet from where you will contact the database. The database only accepts incoming traffic of known subnets.

Granted privileges

databaseuserprivileges
localdwhdpuserCONNECT/local_dwhmessage:SELECT/local_dwhmessage_key_value:SELECT/local_dwhmessage_key_value_plus:SELECT
nippindpuserCONNECT/nippin_message:SELECT
Privileges table

"data_collection_name" in local database

  • BSACC-ME registration "First registration" = BSACC_REPRT
  • BSACC-ME registration "Follow-up - Involvement police and prosecutor" = BSACC_FU_POLCE
  • BSACC-ME registration "Follow-up - Casemanagement contact" = BSACC_FU_CONT
  • BSACC-ME registration "Follow-up - Casemanagement redirection" = BSACC_FU_REFERRAL
  • BSACC-ME registration "Follow-up - Medical follow-up" = BSACC_FU_MED
  • BSACC-ME registration "Follow-up - Psychological follow-up" = BSACC_FU_PSYCHC

Query examples

With the "data_collection_name" and the following information, you will be able to link multiple tables with each other.

  • local_dwhmessage_key_value: Key value table with more information about the registration
  • msg_document_id: document id of your message located in local_dwhmessage table
  • document_id: document id of your registration
  • local_dwhmessage: table where you can find all the registrations
  • local_dwhmessage_key_value_plus: Extra table to define attribute type and value of a key value
  • key_value_id: Key value id linked to the id of the local_dwh_message_key_value
  • local_dwhmessage_key_value:

"local_dwhmessage_key_value" column "msg_document_id" refer to the "document_id" of "local_dwhmessage".

"local_dwhmessage_key_value_plus" column "key_value_id" refer to the id of "local_dwhmessage_key_value".

Query 1: Get all registrations from the last 15 days.

SELECT * from local_dwhmessage WHERE data_collection_name = 'add data_collection_name' and created_on > current_date - interval '15' day;

Query 2: Get all registrations and key value.

SELECT * from local_dwhmessage as ldm left join local_dwhmessage_key_value as ldmkv on ldmkv.msg_document_id = ldm.document_id WHERE ldm.data_collection_name = 'add data_collection_name';

Query 3: Get all registrations, key value and key value plus from.

SELECT * from local_dwhmessage as ldm left join local_dwhmessage_key_value as ldmkv on ldmkv.msg_document_id = ldm.document_id left join local_dwhmessage_key_value_plus as ldmkvp on ldmkvp.key_value_id = ldmkv.id WHERE ldm.data_collection_name = 'add data_collection_name';
This documentation is being updated regularly. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please create a request (type : request for information) via our portal (https://sciensano.service-now.com/sp) or send us an e-mail via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!

johanvanbussel Thu, 02/15/2024 - 15:26

Architecture 2.5

Architecture 2.5 Bart.Servaes Sat, 01/06/2024 - 16:37

Uniformed naming convention

Uniformed naming convention

Change name: 

Create DCD formio naming structure using a general overall naming convention of healthdata projects.

Change Description:

The change is to refactor the formio DCD naming to have a structure as:

HDBPnumberHDBPabbreviationdcdname/abbreviationversionnumber

Where the abbreviation will be used as seen in the column “TX_PROJ_BUS_ABBREV” of the document below, that will be a reference to fill the MDM:

Example 1: 

So for the formio DCDs of the project “Mandatory registration of spine surgery” (full name) it would be something like:

HDBP0240_SPINE_1 and because there is only 1 dcd for the project we do not use a dcd name.

Example 2:
So for the formio DCDs of the project “Pneumology Endobronchial valve” (full name) it would be something like:

HDBP0231_ZEPHYR_ZEPHYR_REPLAC_1
HDBP0231_ZEPHYR_ZEPHYR_PRIM_IMPLT_1

Full example:

dcdname/abbreviation: will be the TX_REG_NAME of the DCD.

form titleform nameform pathcollection name
HDBP0240_SPINEhdbp0240Spine1hdbp0240spine1HDBP0240SPINE1
HDBP0231_ZEPHYR_ZEPHYR_PRIM_IMPLThdbp0231ZephyrZephyrPrimImplt1hdbp0231zephyrzephyrprimimplt1HDBP0231ZEPHYRZEPHYRPRIMIMPLT1

Bart.Servaes Fri, 01/26/2024 - 22:05

Sending code values instead of code IDs in S2S requests

Sending code values instead of code IDs in S2S requests

In the following example we will demonstrate sending code values instead of code IDs. We want, for instance, to send a patient's country and zip code information, more specifically for someone who lives in Brussels, Belgium:

Currently, in the case of fields containing code list elements with S2S submissions, we send the code ID in the body of the message, like so:

"CD_CNTRY_RES": "130349",
"CD_POSTCODE": "4525",

In CSV upload, however, we send the code value of the code object.

From the new Architecture 2.5 onward, we will do so too for S2S submissions using the API. So, for the example above, the new way of sending the same values will be as follows:

"CD_CNTRY_RES": "BE", "CD_POSTCODE": "1000",

The image below shows the relationship between these fields in the database, in the case of the country:

And for the postal code:

The purpose of this change is to stop sending the code IDs in System-to-System and start sending the code values, just like we are doing in the CSV upload. The performance improvements that go along with this result from the fact that the service that returns the code value for a given ID is done through a single request per submission to the MDM, thus saving a lot of time in calls to get these values.

Since the code value is not unique, we need to get the codelist ID of an element, given its key, from a given DCD version ID. This could be summarized for this example as follows:

The key CD_CNTRY_RES on DCD version ID 55 (BSACC Police And Public Prosecutor) has the codelist id 347.
The key CD_POSTCODE on DCD version ID 55 (BSACC Police And Public Prosecutor) has the codelist id 12.

Code Lists and Code Values are agreed upon by IAT and the Researchers. These are sent to DC by IAT via the DCD specifications. A Code ID is the identification of a Code Value in MDM. So how is the translation done?

In the case of sending code IDs, the user calls our services to retrieve the code IDs through requests to our API. In these requests, the user always receives the complete code object, containing not only the code ID, but also the code value. Let’s have a look at an example for the country code (code list 347):

The image shows how we were sending the code ID 130349 in System-to-System and how we can send the code value “BE” in Architecture 2.5, the same way that was done already using the CSV Uploader.

In terms of code, if we were already calling the services to get the code ID, the only thing that is necessary is changing the returned value from CodeID to CodeValue from the same Code object that is returned.

FROM:

mappedCode = codeFieldService.getFieldCode(field.getFieldId(), codeContent).codeId();

TO: 

mappedCode = codeFieldService.getFieldCode(field.getFieldId(), codeContent).codeValue();

That’s the only change needed in the mapping. All the rest remains exactly the same.

For more information, please check our documentation at 1. End-to-End process to submit DCD registrations | docs.healthdata.be

Architecture 2.0 and Architecture 2.5 proxies

Below you find an example of how the service to get a project-result is called in both proxies:

Architecture 2.0

https://hd4dp.acceptance.healthdata.be/proxy/api/installation/project-result?organization-id=120

[{"projectId":4,"dcdId":9,"dcdVersionId":9,"version":1,"formioName":"hdbp0231ZephyrZephyrPrimImplt1"}, {"projectId":4,"dcdId":10,"dcdVersionId":10,"version":1,"formioName":"hdbp0231ZephyrZephyrReplac1"}, {"projectId":4,"dcdId":11,"dcdVersionId":11,"version":1,"formioName":"hdbp0231ZephyrZephyrFllwup1"}, {"projectId":5,"dcdId":12,"dcdVersionId":12,"version":3,"formioName":"hdbp0062BelPstSpineTangoIntake1"}, {"projectId":5,"dcdId":13,"dcdVersionId":13,"version":3,"formioName":"hdbp0062BelPstSpineTangoConservativeTherapy1"}, {"projectId":5,"dcdId":14,"dcdVersionId":14,"version":3,"formioName":"hdbp0062BelPstSpineTangoPatientQuestionnaire1"}, {"projectId":5,"dcdId":15,"dcdVersionId":15,"version":3,"formioName":"hdbp0062BelPstSpineTangoSurgery1"}, {"projectId":6,"dcdId":16,"dcdVersionId":16,"version":1,"formioName":"hdbp0000TestTestDcd011"}, {"projectId":6,"dcdId":17,"dcdVersionId":17,"version":1,"formioName":"hdbp0000TestTestDcd021"}, {"projectId":7,"dcdId":18,"dcdVersionId":18,"version":1,"formioName":"hdbp0386OrthoprideHipOpHipPrimImplt1"}, {"projectId":7,"dcdId":19,"dcdVersionId":19,"version":1,"formioName":"hdbp0386OrthoprideHipOpHipRevis1"}, {"projectId":7,"dcdId":20,"dcdVersionId":20,"version":1,"formioName":"hdbp0386OrthoprideHipOpHipResec1"}, {"projectId":8,"dcdId":21,"dcdVersionId":21,"version":1,"formioName":"hdbp0288OrthoprideKneeOpKneePrimImplt1"}, {"projectId":8,"dcdId":22,"dcdVersionId":22,"version":1,"formioName":"hdbp0288OrthoprideKneeOpKneeRevis1"}, {"projectId":8,"dcdId":23,"dcdVersionId":23,"version":1,"formioName":"hdbp0288OrthoprideKneeOpKneeResec1"}, {"projectId":9,"dcdId":24,"dcdVersionId":24,"version":1,"formioName":"hdbp0048OrthoprideMegaOpMpPrimImplt1"}, {"projectId":9,"dcdId":25,"dcdVersionId":25,"version":1,"formioName":"hdbp0048OrthoprideMegaOpMpRevis1"}, {"projectId":9,"dcdId":26,"dcdVersionId":26,"version":1,"formioName":"hdbp0048OrthoprideMegaOpMpResec1"}, {"projectId":1,"dcdId":1,"dcdVersionId":30,"version":3,"formioName":"hdbp0025HhNsihHhPre3"}, {"projectId":1,"dcdId":2,"dcdVersionId":31,"version":3,"formioName":"hdbp0025HhNsihHhIo3"}, {"projectId":1,"dcdId":3,"dcdVersionId":32,"version":3,"formioName":"hdbp0025HhNsihHhPost3"}, {"projectId":10,"dcdId":27,"dcdVersionId":33,"version":1,"formioName":"hdbp0245TaviTaviImplt1"}, {"projectId":10,"dcdId":28,"dcdVersionId":34,"version":1,"formioName":"hdbp0245TaviTaviFllwup1"}, {"projectId":11,"dcdId":29,"dcdVersionId":35,"version":1,"formioName":"hdbp0000CorrectionForm1"}, {"projectId":13,"dcdId":34,"dcdVersionId":40,"version":2,"formioName":"hdbp0016PacemakerQermidPacemakerPrimoImplantation2"}, {"projectId":13,"dcdId":35,"dcdVersionId":41,"version":2,"formioName":"hdbp0016PacemakerQermidPacemakerAjoutRemplacementElectrode2"}, {"projectId":13,"dcdId":36,"dcdVersionId":42,"version":2,"formioName":"hdbp0016PacemakerQermidPacemakerRemplacement2"}, {"projectId":13,"dcdId":37,"dcdVersionId":43,"version":2,"formioName":"hdbp0016PacemakerQermidPacemakerExplantation2"}, {"projectId":13,"dcdId":38,"dcdVersionId":44,"version":2,"formioName":"hdbp0016PacemakerQermidPacemakerSuivi2"}, {"projectId":14,"dcdId":39,"dcdVersionId":45,"version":3,"formioName":"hdbp0019Bewsd3"}, {"projectId":15,"dcdId":40,"dcdVersionId":46,"version":2,"formioName":"hdbp0012AngioHospitalisatie2"}, {"projectId":15,"dcdId":41,"dcdVersionId":47,"version":2,"formioName":"hdbp0012AngioHospitalisatieMetPci2"}, {"projectId":15,"dcdId":42,"dcdVersionId":48,"version":2,"formioName":"hdbp0012AngioHospitalisatieMetFfr2"}, {"projectId":15,"dcdId":43,"dcdVersionId":49,"version":2,"formioName":"hdbp0012AngioHospitalisatieMetFfrEnPci2"}, {"projectId":15,"dcdId":44,"dcdVersionId":50,"version":2,"formioName":"hdbp0012AngioFollowUpNaPci2"}, {"projectId":16,"dcdId":45,"dcdVersionId":51,"version":1,"formioName":"hdbp0240Spine1"}, {"projectId":17,"dcdId":46,"dcdVersionId":52,"version":4,"formioName":"hdbp0008Crrd4"}, {"projectId":19,"dcdId":48,"dcdVersionId":54,"version":1,"formioName":"hdbp0242BsaccMeBsaccReprt1"}, {"projectId":19,"dcdId":49,"dcdVersionId":55,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuPolce1"}, {"projectId":19,"dcdId":50,"dcdVersionId":56,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuCont1"}, {"projectId":19,"dcdId":51,"dcdVersionId":57,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuReferral1"}, {"projectId":19,"dcdId":52,"dcdVersionId":58,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuMed1"}, {"projectId":19,"dcdId":53,"dcdVersionId":59,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuPsychc1"}, {"projectId":20,"dcdId":54,"dcdVersionId":60,"version":9,"formioName":"hdbp0001Bcfr9"}, {"projectId":21,"dcdId":55,"dcdVersionId":61,"version":3,"formioName":"hdbp0078Pitter3"}, {"projectId":22,"dcdId":56,"dcdVersionId":62,"version":3,"formioName":"hdbp0051Becpr3"}, {"projectId":23,"dcdId":57,"dcdVersionId":63,"version":1,"formioName":"hdbp0037Epilabo1"}, {"projectId":24,"dcdId":58,"dcdVersionId":64,"version":1,"formioName":"hdbp0244RProfildRprofildTreat1"}, {"projectId":24,"dcdId":59,"dcdVersionId":65,"version":1,"formioName":"hdbp0244RProfildRprofildRenewal1"}, {"projectId":25,"dcdId":60,"dcdVersionId":66,"version":1,"formioName":"hdbp0274HartDefibDefibPrimImplt1"}, {"projectId":26,"dcdId":61,"dcdVersionId":67,"version":1,"formioName":"hdbp0056MvoMvoImp1"}, {"projectId":26,"dcdId":62,"dcdVersionId":68,"version":1,"formioName":"hdbp0056MvoMvoFu1"}, {"projectId":25,"dcdId":63,"dcdVersionId":69,"version":1,"formioName":"hdbp0274HartDefibDefibExpl1"}, {"projectId":25,"dcdId":64,"dcdVersionId":70,"version":1,"formioName":"hdbp0274HartDefibDefibRepl1"}, {"projectId":25,"dcdId":65,"dcdVersionId":71,"version":1,"formioName":"hdbp0274HartDefibDefibElect1"}, {"projectId":27,"dcdId":67,"dcdVersionId":72,"version":1,"formioName":"hdbp0000DvrForm1"}]

Architecture 2.5

https://hd4dp.acceptance.healthdata.be/proxy/api/installation/project-result?organization-id=120&dcd-id=49

[{"projectId":19,"dcdId":49,"dcdVersionId":55,"version":1,"formioName":"hdbp0242BsaccMeBsaccFuPolce1"}]

As we can see, using proxy (Architecture 2.0) we have all projects from organization 120, while proxy (Architecture 2.5) returns only one element in its response. This is because the DCD filter in proxy (Architecture 2.5) is done in the database more efficiently, while in the proxy Architecture 2.0 the same filter was done in the code after the service call.
So, the filter is not used in the first call and if Architecture 2.0 calls the same service in Architecture 2.5 without the filter (https://hd4dp.acceptance.healthdata.be/proxy/api/installation/project-result?organization-id=120) it will get exactly the same result.

Architecture 2.0 and Architecture 2.5 proxies tests

CSV Uploader

For the CSV Upload, nothing has changed. So the same inputs are valid for both architectures. Here are the example of some successful tests:

System-To-System

For S2S, as already mentioned, the only difference is that Architecture 2.0 sends Code IDs while Architecture 2.5 sends Code Values. Here are the same tests in both architectures:

Proxy (Architecture 2.0):

Proxy (Architecture 2.5):

As we can see, we have the same request, where the first sends Code IDs and the second sends Code Values; both return a successful response.

Front-end

In the front-end (GUI) everything is received normally as the same request was sent twice. After all, S2S will always send the same request with Code IDs to FormIO.

Data Warehouse

Once again, all the information arrives seamlessly, due to the fact that the FormIO validation already happened in the previous step:

First call (Architecture 2.0):

Second call (Architecture 2.5):

Adelaide.DAmore Wed, 01/31/2024 - 20:33

MDM Mapping of billing codes for MyCareNet

MDM Mapping of billing codes for MyCareNet

Note: The below described mapping solution only applies to the study project of PACEMAKER.

In Architecture 2.0 the DCD fields related to billing codes for MyCareNet do not contain the billing code as their code value, instead this is just a numerical value, and the code value is only displayed in the label, e.g.:

When then sending key values to localdwh and dwh, the submission will contain a key value as follows:

When generating a message for MyCareNet, however, this same numerical value is used in the message payload. Keeping these numerical values, will generate MyCareNet messages with a incorrect billingcode, in this case <BillingCode>2</BillingCode>.

In Architecture 2.5 an MDM Mapping of billing codes for MyCarenet has been implemented. The value for the key will no longer be a numerical value such as 1,2,3… but an actual billing code. To facilitate this requirement, a new column has been introduced in the MDM to associate the billing code with the correct 13 character value, such as "182932-182943". This billing code will be accepted by MyCareNet.

Bart.Servaes Sat, 01/06/2024 - 16:37

HD4DP v2 Online Acceptance Environment

HD4DP v2 Online Acceptance Environment

Introduction

To support development and validation of data transfers using S2S API or CSV upload, a central Online Acceptance Environment is available for the IT services or IT partners of data providers. It is meant to replace the locally installed acceptance environments at the side of the data providers. With the Online Acceptance Environment the three types of data transfer can be tested and validated: data transfer via an API platform, via an SFTP client and via manual input in the study form.

In order to keep the acceptance environment light, it is rebuilt once a week (every Saturday), automatically removing all data that have been entered for testing. The data are stored locally and will not be sent to Healthdata.be infrastructure. The testing is limited to the upload to the HD4DP v2 application.

Application URLs and port

The Online Acceptance Environment can be found on https://hd4dp.acceptance.healthdata.be, which is a publically accessible URL.

On the homepage you are requested to select your organization from the drop-down list in order to proceed.

Log in with the credentials you have received upon request. The username is test@sciensano.be for all users.

Since the list of organizations to choose from is limited, you might not find your organization in it. In that case we advise you to request your credentials through our service portal at https://sciensano.service-now.com/sp via the Request something tab and subsequently the Request for Information box.

When requesting an account for this acceptance environment you will receive 3 different types of credentials:
⦁ credentials to log in to the front end of the online acceptance environment
⦁ credentials to use the API (-> authorization tab in Postman)
⦁ credentials for the SFTP server you use to test the CSV Upload

Once logged in, the layout looks very familiar: to the left you will find the navigation panel with all running projects and projects that have passed the user acceptance testing (UAT) phase. Note that the list of projects featuring in our Online Acceptance Environment is not filtered out for the organization you have selected.

The data transfer methods

As mentioned above, the Online Acceptance Environment enables the testing of the uploads for the following three types of data transfer. They are described in order of preference underneath:

Data transfer via an API platform

The data are extracted directly from the EPD systems and sent to HD4DP v2 local using S2S API before they are sent to healthdata.be. This transfer method requires the use of an API development platform, such as Postman (freely available).

The endpoint (URL) to send your payload to for testing is

https://hd4dp.acceptance.healthdata.be/proxy/api/dcd/payload/submit

This endpoint is to be completed with some parameters, such as the ID of an organization, the ID of a dcd, the version number:

https://hd4dp.acceptance.healthdata.be/proxy/api/dcd/payload/submit?organization-id=6&dcd-id=18&Version=1

Click on the Send button to post the payload. A succesful submission is indicated with the status message “202 Accepted”. This can also be checked visually in the front end of the Online Acceptance Environment.

The field Data source in the top selection bar indicates whether the data were transferred via S2S API, CSV Upload or manually with HD4DP.

In the production environment records sent through API are sent directly to the healthdata.be infrastructure (status “Submitted” in the Progress field).

Next to posting payloads (POST) you can also retrieve information (GET). Examples of such "calls":

  • The call https://hd4dp.acceptance.healthdata.be/proxy/api/organization (see below) will return an organization id:
  • The call https://hd4dp.acceptance.healthdata.be/proxy/api/dcd/menu/structure?organization-id=6 (see below) will return the menu structure with all projects your organization is registered for.

More information about the API data transfer can be found at https://docs.healthdata.be/documentation/hd4dp-v2-health-data-data-providers/hd4dp-v2-s2s-api

Data transfer via an SFTP client

The csv upload is the second type of data transfer. The data are transferred to an SFTP server and subsequently picked up by the healthdata.be system. This transfer method requires the use of an SFTP client, such as WinSCP (freely available).

The Login window will look somehow as follows:

Herein, you enter Host name (sftp.acceptance.healthdata.be) and Port number (2220).

Credentials for the SFTP folder are shared together with the Front-end and API credentials as described in the section “Navigate to and access the Online Acceptance Environment”.

When logging in to WinSCP, you will need to navigate to the correct csv folder : csv/<project>/<dcd>. Here you need to drag and drop the csv you want to upload from the left panel to the right panel. The CSV file will now be picked up by the polling system of the CSV Uploader, which checks for new CSV files every minute.

The folders Archive and Result will only be created after the first CSV file has been uploaded for testing.

The Result folder shows a log file containing CSV Upload reports. The status Error Count shows technical errors such as incorrect name, code …

CSV files that were uploaded in Architecure 1 can be reused in Architecture 2. Prerequisite for this is the addition of necessary fields that are typical for Architecture 2, e.g.:

  • Author Group (TX_AUTHOR_GR) with the value "Test group"
  • Author (TX_AUTHOR) with the value "test@sciensano.be"
  • Coauthor (TX_COAUTHOR) with the value "test@sciensano.be"

To further facilitate the process of reusing CSV files a mapping table with old and new CSV names is provided.

Next to adding fields, you can also leave out fields, which is indicated in the log file reports as a warning.

Once again the back-end process can be checked in the study forms on the front-end interface. You want to refresh the window to update to the newest status.

More information about the CSV data transfer can be found at https://docs.healthdata.be/documentation/hd4dp-v2-health-data-data-providers/hd4dp-v2-csv-upload.

Manual input in the study form

The third data transfer method is the form entry, carried out manually. For this you can use a common browser such as Google Chrome. This method can also be used to validate data sent via S2S API or CSV Upload.

Bart.Servaes Thu, 05/25/2023 - 12:19

Requesting access

Requesting access

A request for access to the online acceptance environment will be made available in the Entity Access Management tool available via eam.healthdata.be. See also https://docs.healthdata.be/EAM

This feature is foreseen to be added to the EAM portal during the summer of 2023. In the meantime or when the EAM portal should be unavailable, you can use the service portal to request access to the online acceptance environment by creating an incident and clearly mentioning you are an IT Department or IT partner of a data provider requesting access to the online acceptance environment.

More information on how to create an incident in the service portal is available on https://docs.healthdata.be/documentation/hd4dp-v2-health-data-data-providers/how-report-incident

You will receive 3 types of credentials:

  • Credentials for the HD4DP2 web form application.
  • Credentials for the API data transfer.
  • Credentials for the SFTP server to upload CSV files.
Bart.Servaes Tue, 10/24/2023 - 16:36

Support service for HD4DP v2

Support service for HD4DP v2

The Service Desk of healthdata.be (Sciensano) helps users of our applications and services and deals with requests and problems when they arise.

The Service Desk focuses on those services run by our IT Services (HD4DP, HD4RES, healthstat.be,...) and helps you with accounts and passwords. For questions about the content and objective(s) of the projects, we kindly refer to the managing research organizations.

For most efficient processing of your request, we advise you to use our service portal: https://sciensano.service-now.com/sp.

Please find below our support window hours:

Adelaide.DAmore Tue, 10/24/2023 - 12:39

How to report an incident

How to report an incident

The healthdata.be service (Sciensano) processes each incident report according to a Standard Operating Procedure (SOP). A public version of this SOP "HD Incident Management Process" is also available on this portal docs.healthdata.be.

To submit an incident related to projects and applications in production and facilitated or managed by Sciensano's healthdata.be service, you must first log into the HD Service and Support portal: https://sciensano.service-now.com/sp.

After the login step, you will arrive at the main page of the portal.

On the main page, you must select "Get Help".

A new page with the title "Create an incident" will appear.

You can now document your incident or problem by providing the following information:

Please indicate the urgency of resolving your issue based on its criticality to the business.

Please indicate the type of problem you are experiencing.

When the problem type "Application" is selected, two additional fields appear: "Project Name" and "Application".

Please select the appropriate information.

Please describe clearly and briefly (1 sentence) the subject of your problem.

Please describe the problem in detail. The following aspects are important for us to understand and solve the problem:

  • a description of the actions you want to perform but fail to perform (e.g. provide us with a field name, a validation rule, a button, etc.)
  • a description (if possible) of the sequential steps you follow to use the service or the application of healthdata.be for which you need support;
  • a brief description of the technical problem you are experiencing (e.g. error messages)

We strongly recommend that you add a screenshot describing the problem (IMPORTANT: do not provide us with patient data!).

You can add the screenshot by clicking on "Add attachments".

On the right side of the form, the mandatory information items of the incident form are listed. When these fields are completed, their names disappear from the "required information" box.

The form can only be submitted if all required fields are filled in, by pressing the green "Submit" button.

If all required fields have not been completed, a warning message will appear at the top of the form.

In addition, missing mandatory fields will be highlighted in green.

When the incident form has been successfully submitted, a preview of your submission appears in a new screen.

On the right side of the screen you will find the details, including the incident number.

On the left side of the screen, you will find a chronology of your incident processing, starting with your creation.

Adelaide.DAmore Tue, 10/24/2023 - 12:40

Support service of healthdata.be

Support service of healthdata.be

The Service Desk of healthdata.be (Sciensano) helps users of our applications and services and deals with requests and problems when they arise.

The Service Desk focuses on those services run by our IT Services (HD4DP, HD4RES, healthstat.be,...) and helps you with accounts and passwords. For questions about the content and objective(s) of the projects, we kindly refer to the managing research organizations.

For most efficient processing of your request, we advise you to use our service portal: https://sciensano.service-now.com/sp.

Please find below our support window hours:

manager Tue, 10/10/2023 - 11:40

How to report an incident

How to report an incident

The healthdata.be service (Sciensano) processes each incident report according to a Standard Operating Procedure (SOP). A public version of this SOP "HD Incident Management Process" is also available on this portal docs.healthdata.be.

To submit an incident related to projects and applications in production and facilitated or managed by Sciensano's healthdata.be service, you must first log into the HD Service and Support portal: https://sciensano.service-now.com/sp.

After the login step, you will arrive at the main page of the portal.

On the main page, you must select "Get Help".

A new page with the title "Create an incident" will appear.

You can now document your incident or problem by providing the following information:

Please indicate the urgency of resolving your issue based on its criticality to the business.

Please indicate the type of problem you are experiencing.

When the problem type "Application" is selected, two additional fields appear: "Project Name" and "Application".

Please select the appropriate information.

Please describe clearly and briefly (1 sentence) the subject of your problem.

Please describe the problem in detail. The following aspects are important for us to understand and solve the problem:

  • a description of the actions you want to perform but fail to perform (e.g. provide us with a field name, a validation rule, a button, etc.)
  • a description (if possible) of the sequential steps you follow to use the service or the application of healthdata.be for which you need support;
  • a brief description of the technical problem you are experiencing (e.g. error messages)

We strongly recommend that you add a screenshot describing the problem (IMPORTANT: do not provide us with patient data!).

You can add the screenshot by clicking on "Add attachments".

On the right side of the form, the mandatory information items of the incident form are listed. When these fields are completed, their names disappear from the "required information" box.

The form can only be submitted if all required fields are filled in, by pressing the green "Submit" button.

If all required fields have not been completed, a warning message will appear at the top of the form.

In addition, missing mandatory fields will be highlighted in green.

When the incident form has been successfully submitted, a preview of your submission appears in a new screen.

On the right side of the screen you will find the details, including the incident number.

On the left side of the screen, you will find a chronology of your incident processing, starting with your creation.

johanvanbussel Tue, 04/04/2023 - 11:46

Submit a request for information about HD

Submit a request for information about HD

To request information about the healthdata.be platform, you first need to log in to the HD Service and Support portal: https://sciensano.service-now.com/sp.

After the login step, you will arrive at the main page of the portal.

On the main page select "Request something".

new page with the different types of request will appear.

Select the box "Request for information about HD".

A new page with the titles of the Request for information about HD will appear.

You can now document your request by providing following information:

Provide a short and clear description of your request for information (1 sentence).

Provide a detailed description of your request for information.

If available, please upload additional documents relevant for this request for information about HD.

On the right side of the form, the required information elements of the request form are listed. When these fields are completed, these field names will disappear in the "required information" box.

Only after all required fields have been completed, a form can be submitted by selecting the green Submit button.

If not all required fields were completed a warning message will appear on top of the form.

Also the missing required fields will be highlighting in green.

When the request form was successfully submitted, an overview of your request will appear in a new screen.

On the right of the screen, you will find the details , including the Request number

On the left of the screen, you will find a timeline of the handling your request, starting with your creation.

Jonas.VanBussel Sat, 09/30/2023 - 14:14

Email security policy

Email security policy

WHAT IS THE PROBLEM?

Sciensano blocks e-mails from organizations if the configuration of their e-mail and/or DNS services allow potential abuse by spammers/attackers. More specifically, if the configuration enables other senders to impersonate your organisation by allowing them to mimic your organization’s e-mail “Header From”.

In other words, they can send phishing and spam mails that cannot be distinguished from genuine mails from your organization.

If you’re responsible for managing your ICT infrastructure, keep reading. If not, pass this message on to your ICT department or to the ICT service that’s managing your ICT infrastructure.

HOW TO SOLVE IT?

You’ll have to verify that your configuration complies with “Sender Alignment” security requirements.
More specifically, your mail services and DNS will have to be configured according to ICT standards.

These configurations are common, well-documented and supported by hosting companies. Some useful links:

We’ve noticed that this issue frequently occurs in organizations which moved their ICT infrastructure to cloud services such as Microsoft (O365), Amazon, Google, and MS Azure without properly configuring the ICT infrastructure which is not managed by these providers.

The configurations and recommendations need to be implemented on the customer’s ICT infrastructure, either internally or externally. DNS and Mail services are the main ICT platforms for these actions.

THE USE OF DIFFERENT DOMAINS IN THE MAIL SENDING PROCESS

E-mails contain an “Envelope From” and a “Header From”. Both need to match to avoid that the mail is blocked.

Some examples:

  1. A public service is using its new domain name in the “Header From” and its old domain name in the “Envelope From”.
  • Envelope From = noreply@publicservice.fgov.be
  • Header From = noreply@publicservice.belgium.be

➔ These e-mails will be blocked.

Remark: Because it’s a noreply address, the sender will not even be aware of us rejecting the e-mail …

2. An organization is using a cloud service (Freshservice) for its helpdesk tool and the “Envelope From” has not been customised.

• EnvelopeFrom = bounces+us.3.52773-helpdesk=organisation.be@emailus.freshservice.com
• Header From = helpdesk@organisation.be

➔ These e-mails will be blocked.

3. A company uses a cloud service (Amazon SES) to send the delivery notification and the “Envelope From” has not been customized.

  • Envelope From = 01020188573f374-96de6437-9134-45f4-8aa6-3e9ac18d5848-000000@euwest-1.amazonses.com
  • Header From = noreply@company.be

➔ These e-mails will be blocked.

Jonas.VanBussel Fri, 08/04/2023 - 09:50

Release notes

Release notes

February 14th, 2024

  • DCD First registration:
    • Field CD_INJRY_WRST_RIGHT:
      The code for the entry 'niet onderzocht' has been changed into 162650008 (previously wrong code was assigned to this label). The entry 'ja' should have code '1' which is now corrected. In MDM no changes are needed because the latter codes were already correctly linked with the respective labels. Also change of FR label CD_INJRY_WRST_RIGHT from "Niveau observée au niveau du poignet droit ?" into "Lésion observée au niveau du poignet droit ?"
  • Updated documentation on codes:
    • Code list SEX (for all DCDs) - used in variable CD_PAT_SEX:
      for code 32570681000036106 the correct Dutch label is 'onbepaald geslacht' instead of 'onbekend' (codes switched) - line 38
      for code 261665006 the correct Dutch label is 'onbekend' instead of 'onbepaald geslacht' (codes switched) - line 38
    • Code list YNU_TRANSGENDER (DCD '1ste aanmelding') - used in variable CD_TG_ID_VICTIM:
      the correct code for choice option ""ja/oui"" is ""12271241000119109"" instead of ""12271241000119100"" as automatically rounded by excel in previous DCD specs - line 50
    • Code list MAGISTRATE (for DCD '1ste aanmelding' and DCD 'Follow-up politie en parket') - variable CD_RESPB_LEGAUT:
      code VE is a duplicate code in this code list. For choice option ""West-Vlaanderen - Veurne"" code VU should be used instead of VE - line 233 (in DCD '1ste aanmelding) & line 86 (in DCD 'Follow-up politie en parket')
    • Code list YNU_UNCONSC (for DCD '1ste aanmelding') - used in variable CD_UNCSCNS:
      for code 0 the correct label is ""neen/non"" instead of ""ja/oui"" (codes switched) - line 394
      for code 419045004 the correct label is ""ja/oui"" instead of ""neen/non"" (codes switched) - line 395
    • Code list YNU_AMN (for DCD '1ste aanmelding') - used in variable CD_CONT_CLTH:
      correct code for choice option ""neen/non"" is ""0"" instead of ""1"" (incorrect code) - line 528
    • Code list YNU_AMN_NA (for DCD '1ste aanmelding') - used in variable CD_AFTER_OFFNC_TMPN_SANTWL:
      for code 261665006 the correct Dutch/French label is ""onbekend/inconnu"" instead of ""niet van toepassing/pas d'application"" (codes switched) - line 1269
      for code 385432009 the correct Dutch/French label is ""niet van toepassing/pas d'application"" instead of ""onbekend/inconnu"" (codes switched) - line 1270
    • Code list YNU_AMN_URY (for DCD '1ste aanmelding') - used in variable CD_VICTIM_URY:
      for code 0 the correct Dutch/French label is ""neen/non"" instead of ""ja/oui"" (codes switched) - line 1312
      for code 249274008 the correct Dutch/French label is ""ja/oui"" instead of ""neen/non"" (codes switched) - line 1313
    • Code list PRESENCE_715 (for DCD 'Follow-up psych opvolging') - used in variable CD_PRESNC_PAT_CONS_PSYCHC:
      for code PR0004 the correct Dutch/French label is 'afwezig - niet op voorhand geannuleerd/absent-e - pas d'annulation au préalable' instead of 'Afwezig - geannuleerd < 48h en opnieuw ingepland/Absent-e - a annulé < 48h et planifié un nouveau rendez-vous' (codes switched) - line 59
      for code PR0005 the correct Dutch/French label is 'afwezig - geannuleerd < 48h en opnieuw ingepland/absent-e - a annulé < 48h et planifié un nouveau rendez-vous' instead of 'Afwezig - geannuleerd < 48h en niet opnieuw ingepland/Absent-e - a annulé  < 48h et pas planifié de nouveau rendez-vous' (codes switched) - line 57
      for code PR0006 the correct Dutch/French label is 'afwezig - geannuleerd < 48h en niet opnieuw ingepland/absent-e - a annulé < 48h et pas planifié de nouveau rendez-vous' instead of 'Afwezig - niet op voorhand geannuleerd/Absent-e - pas d'annulation au préalable' (codes switch) - line 58

Apart from above listed changes, minor textual updates have been done to Dutch/French labels (no change in codes or meaning)

September 26th, 2023

  • The following fields have been updated from optional to mandatory:
    • datum contact met slachtoffer / Date du contact avec la victime (DT_CONT_VICTIM) in DCD Follow-up - Casemanagement contact
    • datum doorverwijzing / Date réorientation (DT_REFERRAL) in DCD Follow-up - Casemanagement redirection
    • datum opvolgconsultatie HRC/ZSG  / Date consultation de suivi centre de référence VIH/CPVS (DT_CONSTTN_FU) in DCD Follow-up - Medical follow-up
    • datum geplande consult psy / Date consultation psy planifiée (DT_PLAN_CONS_PSYCHC) in DCD Follow-up - Psychological follow-up

September 8th, 2023

  • Addition of json test file for First registration DCD to be used in upcoming Architecture 2.5

Bart.Servaes Wed, 02/14/2024 - 14:15