Create a "Endobronchial valve" registration

Create a "Endobronchial valve" registration

The study project Endobronchial valve consists of three parts: Primo-implantationFollow-up and Replacement.

This image has an empty alt attribute

On the following pages we explain how you can register for each part.

This documentation is under construction. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please send us an email via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Sun, 09/18/2022 - 11:21

Create a "Endobronchial valve" registration "Primo-implantation"

Create a "Endobronchial valve" registration "Primo-implantation"

To create a "Primo-implantation" registration for the study project Endobronchial valve, select "Primo-implantation" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

In the top right corner of the screen you can find a green button "+ New registration". Press this button.

After pressing the button "+ New registration", the main screen will now be replaced with 2 sections: a study form (in the middle of the screen) and a Table of contents (on the right side of the screen).

By completing the study form, you will create a "Primo-implantation" registration for the study project Endobronchial valve.

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: pressing a section in the table of contents will take you to this section in the study form.

By pressing the tab "Progress" on the right side of the screen , the Table of contents will be replaced by a progress bar and a list of open validation errors.

You can use the list of open validation errors to navigate through the study form: pressing a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can Save or Submit this registration. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can Save but not Submit this registration. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

manager Sun, 09/18/2022 - 11:22

Create a "Endobronchial valve" registration "Follow-up"

Create a "Endobronchial valve" registration "Follow-up"

To create a "Follow-up" registration for the study project Endobronchial valve, select "Follow-up" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

In the top right corner of the screen you can find a green button "+ New registration". Press this button.

After pressing the button "+ New registration", the main screen will now be replaced with 2 sections: a study form (in the middle of the screen) and a Table of contents (on the right side of the screen).

By completing the study form, you will create a "Follow-up" registration for the study project Endobronchial valve.

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: pressing a section in the table of contents will take you to this section in the study form.

By pressing the tab "Progress" on the right side of the screen , the Table of contents will be replaced by a progress bar and a list of open validation errors.

You can use the list of open validation errors to navigate through the study form: pressing a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can Save or Submit this registration. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can Save but not Submit this registration. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is under construction. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please send us an email via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Sun, 09/18/2022 - 11:24

Create a "Endobronchial valve" registration "Replacement"

Create a "Endobronchial valve" registration "Replacement"

To create a "Replacement" registration for the study project Endobronchial valve, select "Replacement" in the dark blue left menu.

You will see the number of versions of this study section. In this case, there is only one version.

When you select the highest version of this study section for the first time, you will see an empty overview table in the main part of your screen. The table contains, among others, the following items: Registration IDProgressAuthorCo-authorUnique ID, Business keyRegistration codeNational registry ID of the patient...

In the top right corner of the screen you can find a green button "+ New registration". Press this button.

After pressing the button "+ New registration", the main screen will now be replaced with 2 sections: a study form (in the middle of the screen) and a Table of contents (on the right side of the screen).

By completing the study form, you will create a "Replacement" registration for the study project Endobronchial valve.

The Table of contents indicates which sections you must complete. You can also use the table of contents to navigate through the study form: pressing a section in the table of contents will take you to this section in the study form.

By pressing the tab "Progress" on the right side of the screen , the Table of contents will be replaced by a progress bar and a list of open validation errors.

You can use the list of open validation errors to navigate through the study form: pressing a validation error in the list will take you to this section in the study form.

When the study form is completed and there are no validation errors, you can Save or Submit this registration. Notice that the Submit button is in clear green.

When the study form is completed but there are validation errors, you can Save but not Submit this registration. Notice that the Submit button is in dim green.

When the study form is saved or submitted, the screen switches to the overview table. Now, this table is not empty anymore but shows the saved or submitted registration.

This documentation is under construction. We try to provide as correct, complete and clear as possible information on these pages. Nevertheless, if you see anything in the documentation that is not correct, does not match your experience or requires further clarification, please send us an email via support.healthdata@sciensano.be to report this documentation issue. Please, do not forget to mention the URL or web address of the page with the documentation issue. We will then adjust the documentation as soon as possible. Thank you!
manager Sun, 09/18/2022 - 11:25